4 x Crunch 6x9" Speaker, Enrock Marine Amplifier, Enrock Speaker Wire (R-CS693-EEA720.4)

---

These Crunch CS speakers are designed to drive your sound system to new heights. They can handle any vocalist, guitar riff or heavy turntable scratch that can be powered through them. This pair of 6-inch by 9-inch, 3-way, 400W CS Speakers features an impact-resistant neo Mylar soft-dome tweeter, silver alpha-cellulose cones for musical power with added resistance to the elements, moisture-resistant rubber surround with high mid-bass impact, anti-resonant stamped steel basket and spade speaker terminals for quick installation. This pair also includes installation hardware.

General Features:

• 3-Way Full-Range Design
• 200W RMS Power
• 400W Peak Power
• 4-Ohm Impedance
• Frequency Response: 46-20kHz
• Sensitivity: 88dB
• Mounting Diameter/Cutout: 8.64" x 5.98"
• Outside Diameter: 10.35 x 7.20"
• Mounting Depth/Chassis Depth: 3.35"
• Neo-Mylar Soft Dome Tweeter
• UV-Resistant Rubber Surround
• Silver Alpha-Cellulose Poly Cones
• Textured ABS Gasket
• Braided Tinsel Leads
• Pure Copper Voice Coil
• Kapton Voice Coil Former
• Epoxy Infused Natural Fiber Spider
• Over Coil Cooling System
• Passive Butterworth Crossover
• 6dB Internal Crossover Special
• Anti-Resonant Stamped Steel Basket
• Ferrite Motor Magnet
• Spade Connectors

UPC Code 806576222095

---

Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged.  The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.

Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation

This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.

EEA720.4 GENERAL FEATURES:

• 4-channel marine/powersports/ car amplifier
• 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
• 120 watts x 2 bridged at 4 ohms
• Class D amp technology
• 720 Watts Peak Power
• variable high- and low-pass filters
• Sealed Chassis for use in harsh environments
• Ultra-efficient full range class D operation
• Built-in Crossover- maximum flexibility
• 2 or 4 channel input
• Signal to noise ratio 97db
• High pass filter 120Hz/80Hz
• Input range: 200mV-10V
• Frequency Response: 20Hz to 20KHz

UPC Code 728120454069

---

The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running. The car amp install kit works with a wide range of sound systems and car types and it makes the installation process easy.

General Features:

• 20 ft. 8 GA Red Power Cable.
• Competition High Quality Fuse Holder.
• 1/4" Ring Terminal.
• 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
• 16 ft. 18 GA Blue Turn-On Wire.
• 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
• 30 ft. Speaker Wire 5/16" Ring Terminal.
• 6 ft. Split Loom Tubing (20) 4" Wire Ties.

UPC Code 728120451105