Flush Mount Pre-Amp Bluetooth Controller, 6x 6.5" 180 Watts Peak Power 2-Way Multi-Element Gray Marine Speakers, 75 Watts RMS x 4 @ 4 Ohms 4-Channel Class H Boat Amplifier W/Wiring Kit

$969.49
$605.99
(You save $363.50 )
SKU:
R-BC4-3MARSPKST6GRY-A-RB
Condition:
Refurbished
Weight:
14.20 LBS
Shipping:
Calculated at Checkout

Bluetooth Controller, 6x 6.5" 180W Marine Speakers, 150W Amplifier W/Wiring Kit

Infinity INF-BC4 Flush Mount Pre-Amp Bluetooth Controller




The Infinity by Harman INF-BC4 Pre-Amp Bluetooth Controller allows consumers to pair his/her media device, and control basic functions through the Infinity controller. This stand-alone audio device features a rotary encoder and large buttons. Add an amplifier, speakers, pair, and stream from the Infinity by Harman BT controller. Easily control the volume of your Bluetooth audio with the rotary controller. IPX6 Waterproof and ready for outdoor use; no need to worry about the forecast. Requires 1 3/8" diameter hole to secure firmly in place.


General Features:

  • Requires 12V power source
  • Requires 1 3/8" diameter hole
  • Internal Blutetooth chipset
  • Dimensions (W x D)2" x 2"
  • Wireless Bluetooth Streaming
  • Rotary Encoder
  • IPX6 Waterproof
  • Flush Mount
  • Large Buttons
  • Durably Constructed

UPC Code 050667372866
JBL Marine Stage 6 6.5" OEM Replacement 180 Watts Peak Power 2-Way Multi-Element Gray Marine Speakers (Pair, Bulk Packaging) (x3)




These JBL Stage Marine Speakers are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, but they bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear. Marine-grade materials & components have been used to suit the demands of a harsh outdoor environment. These speakers feature an IPx5 marine rating.


General Features:

  • 6-1/2" (160mm) Marine Two-way Speaker with 1/2" (13mm) tweeter
  • Power Handling: 60W rms, 180W peak
  • Sensitivity (@ 2.83V): 90dB
  • Frequency Response: 60Hz – 20kHz
  • Nominal Impedance: 4 ohms
  • IPx5 Rated
  • Grille Mounted Tweeters
  • Polymer Basket
  • Individually Voiced
  • Harman Standard Reliability Tested
  • Bulk Packaging

UPC Code
JBL Marine A754 75 Watts RMS x 4 @ 4 Ohms 4-Channel Class H Boat Amplifier




The JBL Marine A754 4-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your boat. You can also bridge the amp to 2-channel mode to drive a couple subs with 200 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your Marine’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.

General Features:

  • 4 channel Marine amplifier
  • 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
  • Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
  • Preamp and speaker-level inputs
  • Preamp outputs
  • Fuse rating: 30A x 2
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • WxHxD=320mm x 51.3mm x 180mm WxHxD=12-5/8” x 2-1/16” x 7-1/8”

UPC Code 050036396943
Metra ST-AK8 8GA Power Sport Motorcycle Amplifier Wiring Kit




The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

  • Designed tor motorcycles
  • 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
  • Pre-terminated ring terminals make connections to the battery simple
  • Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
  • Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
  • All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267