Infinity INF-BC4 Flush Mount Pre-Amp Waterproof Bluetooth Controller, 6x 6.5" 300 Watts Peak Power 2-Way Coaxial Titanium Marine RGB LED Speakers, 4-Channel Compact Boat Audio Amplifier W/Kit

$1,168.99
$730.49
(You save $438.50 )
SKU:
R-BC4-36125M-M704A
UPC:
840440902591
Condition:
New
Weight:
30.53 LBS
Shipping:
Calculated at Checkout

Bluetooth Controller, 6x 6.5" Marine RGB LED Speakers, 4-Ch Amplifier W/Kit

Infinity INF-BC4 Flush Mount Pre-Amp Bluetooth Controller




The Infinity by Harman INF-BC4 Pre-Amp Bluetooth Controller allows consumers to pair his/her media device, and control basic functions through the Infinity controller. This stand-alone audio device features a rotary encoder and large buttons. Add an amplifier, speakers, pair, and stream from the Infinity by Harman BT controller. Easily control the volume of your Bluetooth audio with the rotary controller. IPX6 Waterproof and ready for outdoor use; no need to worry about the forecast. Requires 1 3/8" diameter hole to secure firmly in place.


General Features:

  • Requires 12V power source
  • Requires 1 3/8" diameter hole
  • Internal Blutetooth chipset
  • Dimensions (W x D)2" x 2"
  • Wireless Bluetooth Streaming
  • Rotary Encoder
  • IPX6 Waterproof
  • Flush Mount
  • Large Buttons
  • Durably Constructed

UPC Code 050667372866
Infinity KAPPA 6125M 6.5" Premium 2-Way Coaxial 300 Watt Peak Power Titanium Marine Speakers with RGB LED Lighting (Pair) (x3)




These Infinity KAPPA 6.5" 2-Way 300W Marine Speakers features multi-color LED lighting, Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, SSI (Switch Selectable Impedance) 2 or 4 Ohm option, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. UV resistant marine grade IPX3(IPX5 from front) weather resistant. (Titanium)

General Features:

  • 6.5" 2-way speakers (Pair)
  • Marine-Grade
  • Multi-Color RGB LED Lights
  • Plus One Woofer Cone
  • Grille-Mounted Mylar Tweeter
  • One-Piece Cast Polymer Basket
  • IPX5 Rated for Water Resistance
  • Power Handling: 100 watts RMS (300 peak)
  • Sensitivity: 92 dB at 2.83 volts
  • Frequency Response: 40-25,000 Hz
  • Impedance: 3 ohms

DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.

Loosen and Tighten BY HAND ONLY.  Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.


UPC Code 050667373078
Infinity M704A 4-Channel Weather-Resistant High-Performance Compact Marine Amplifier




Infinity M704A 4-Channel amplifier features selectable all high or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions with power and performance to meet the needs of any outdoor audio system. Max Power - 1000 Watts Peak

Amplifier:

  • 4 Channel Marine Amplifier
  • Class D Technology
  • Max Power - 1000W Peak
  • Power Output, 2Ω - 100W RMS x 4
  • Power Output, 4Ω - 70W RMS x 4
  • Power Output, 4Ω Bridged - 200W RMS x 2
  • Signal-to-Noise Ratio - ≥85dB
  • High and low level inputs
  • Variable crossovers and bass boost

UPC Code 050667372729
Metra ST-AK8 8GA Power Sport Motorcycle Amplifier Wiring Kit




The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

  • Designed tor motorcycles
  • 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
  • Pre-terminated ring terminals make connections to the battery simple
  • Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
  • Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
  • All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267

1 Year Manufacturer Warranty