2x Kicker 10" 1000W Car Audio Subwoofer, 1200W Class D Mono Amplifier W/Kit
The only thing thin about the L7T thin subwoofer is the mounting depth. Whether it’s on the road or trail, these tough subs work perfectly in nearly anything with a motor. The L7T 10-inch Subwoofer is a true-bass, thin subwoofer with a pair of 2Ω voice coils. SoloKon technology uses an injection-molded polypropylene cone and 360-degree back bracing as a single solid unit - both cooling the motor and eliminating distortion. Patented ribbed corners are incorporated into the high-roll Santoprene surround to move smoothly under high SPL. We then stitch the cone to the surround, providing an additional level of integrity that thrives no matter the application. Match any L7T thin sub with a KX-Series mono amplifier for an outstanding combination of power and size. The L7T 10-inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power.
General Features:
- Uses a Sealed or Ported Enclosure
- Square Sub Design Moves 20% More Air Than Round Subwoofers
- Easily Mounts Under or Behind a Seat
- Dual Voice Coil Design
- Ribbed Santoprene Surround Resists Heat And Degrading
- Bumped Top Plate For More Excursion & Smoother Performance
- SoloKon Cone With 360-Degree Back Bracing
- UniPlate Solid Pole Piece & Backplate For Excellent Heat Dissipation
- Durable Steel Basket
- Size (IN.,CM): 10, 25
- Impedance (OHMS): 2 DVC
- Recommended Amplifier Power (watts RMS): 500
- Peak Power (watts, per ANSI/CTA-2031-A): 1000
- Sensitivity (dB 1w/1m): 85.98
- Frequency Response (Hz): 25-100
- Mounting Depth (IN.,CM): 3-3/4, 9.5
- Mounting Cutout, Square (IN.,CM): 9-5/16, 23.7
- Min Rec Sealed Box Volume (CU. FT., Liters): 0.4, 11.3
- Max Rec Sealed Box Volume (CU. FT., Liters): 1.0, 28.3
- Min Rec Vented Box Volume (CU. Ft., Liters): 1.25, 35.4
- Max Rec Vented Box Volume (CU. Ft., Liters): 1.75, 49.6
- What's in the box?: one 10-inch subwoofer, one owner's manual, two stickers
UPC Code 713034085805
The CXA1200.1 Mono Amplifier is built for affordable power and performance, thanks to an optimized circuit layout and the high-grade internal components.
This mono CX-Series Amp is now one-ohm stable, giving you even more wiring options for your system! Using a Class-D power plant, the CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Use the full-range outputs to expand your system with other bass amps, or add a full-range amp to complete your system.
This CX.1 Amplifier delivers as much as 1,200 watts into one bass channel.
General Features:
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
- Power (watts/ch) 4 Ohm: 600x1
- Power (watts/ch) 2 Ohm: 1200x1
- Power (watts/ch) 1 Ohm: 1200x1 +/-10%
- CXRC Remote Bass Capable (sold sep.): yes
- Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 12, 30.6
- Frequency Response (Hz): 25-200Hz
- Input Sensitivity: 250mV-10V (Low Level), 1V-40V (High Level)
- Signal-to-Noise Ratio: 95dB
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter: 25Hz @24dB/octave
- KickEQ™ Boost: Variable 0-6dB @40Hz
UPC Code 713034012757
In a “one size fits all” world it is rare to see a company provide a wide range of options. The team at T-Spec understands how difficult it can be to find just the right product for your application. That is why the new T-Spec amp kit line features 28 different models to cover nearly every price, power and performance level imaginable! T-Spec amp kits utilize the finest materials to ensure maximum performance and hassle-free installation.
- 17FT V8 8 AWG OFC matte solid silver multi-strand power wire
- 3FT V8 8 AWG OFC matte solid black multi-strand ground wire
- 17FT 18 AWG OFC blue remote turn-on wire
- 17FT V8 noise rejecting twisted rca cable with precision molded ends and split tip
- Proprietary V8 MINI ANL fuse holder with 40A fuse
- Nickel Plated 8 AWG seamed crimp ring terminal with 8.5mm hole and silver boot connected at battery end
- Nickel Plated 8 AWG seamed crimp ring terminal with 8.5mm hole and black boot connected at ground
- 8 AWG spade terminals with silver and black boots for amp connection
- Miscellaneous connectors terminals and wire ties
UPC Code 086429280995
