2x Kicker 44CVX124 12" 750W Dual Voice Coil Subwoofer, 300W Amplifier W/Kit
The CompVX is armed with a ribbed Santorini surround that keeps the thick polypropylene cone firing flawlessly. A cast aluminum with motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire, so when you run hundreds of watts to this sub, it gives you loud, distortion-free bass. The CompVX 12" Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power
Genral Features:
- Dual Four-Ohm Voice Coils
- Thick Polypropylene Cone
- Signature Double Blue Surround Stitching
- Ribbed Santoprene® Surround
- SoloKon™ Cone Reinforcement
- Oversized Suspension System
- High-Strength Insulated Tinsel Leads
- High Temp Voice Coil
- Perimeter Venting for Thermal Management
- Massive Ceramic Magnet
- UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation
- Cast Aluminum Basket
- Satin Nickel Spring-Loaded Speaker Terminals
Specifications:
- Size (IN.,CM): 12, 30
- Impedance (OHMS): 4 DVC
- Recommended Amplifier Power (watts RMS): 750
- Peak Power (watts, per ANSI/CTA-2031-A): 1500
- Sensitivity (dB 1w/1m): 87.1
- Frequency Response (Hz): 20-500
- Mounting Depth (in, cm): 6-11/16, 16.9
- Mounting Cutout (in, cm): 11-1/16, 28
- Min Sealed Box Vol (cu. ft, L): 1.0, 28.3
- Max Sealed Box Vol (cu. ft, L): 4.6, 130
- Min Vented Box Vol (cu. ft, L): 1.75, 49.6
- Max Vented Box Vol (cu. ft, L): 2.25, 63.7
What's in the box?
- one 12-inch subwoofer
- one owner's manual
- two stickers
UPC Code 713034081524
This Infinity Primus Amp delivers the right power for subwoofer applications. This compact amp is equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. This amp is easily installed and amazingly reliable - and once they turn on, they'll make a transducer sit up and sing.
General Features
- Mono Subwoofer Amplifier
- Preamp and speaker-level inputs
- Extruded Heatsink
- Low- and High-Level Inputs
- Switchable Bass EQ
- Onboard Active Crossover
- Full Conventional Protection Suite (OCP, OTP, OVP, UVP, DC)
- Fuse rating: 20A x 1
- 300 watts RMS x 1 at 2 ohms ( 4-ohm rating unavailable)
- Variable Low-pass filters: 32-320 Hz, 12 dB/octave
- Variable bass boost: 0-12 dB at 45 Hz
UPC Code 050667373344
The Kicker complete amp kit features top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
Comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included In Amp Kit:
- 17 ft 4 awg blue power wire
- 4 ft 4 awg gray ground wire
- Self tapping bolt and washer
- FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
- 17 ft 16 gauge remote wire
- 16.4 ft KI RCAs
- 12 ft Q series 12 awg speaker wire
- 6x 6" zip ties
- 4 awg firewall grommet
- 1x 18-22 awg butt connector
- 4x 12 awg fork terminals
- 2x blue fork terminal boots
- 2x black fork terminal boots
UPC Code 713034088653