JBL PRV-175 Marine Bluetooth Radio, Remote, Extension, Amp w/Kit, 4x 8" Speakers
JBL PRV175 Bluetooth USB Marine Gauge Style Stereo Receiver is made with a IPX5 marine rated faceplate to protect against any weather condition featuring built in Bluetooth for audio streaming, USB input and AUX inputs, AM/FM tuner and RCA or speaker level power outputs.
General Features
- Marine Gauge Style Digital Media Receiver
- AM/FM tuner
- Bluetooth Audio Streaming
- Built-In Amplifier (45 peak x 4 channels)
- Waterproof Faceplate
- USB input and control-for USB drives only
- Auxiliary input
- 2 pair of RCA output
- Wired remote option
UPC Code 648701217503
These JBL Stage Marine Speakers are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, but they bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets and rubber surrounds. The polypropyelene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.
General Features:
- IPx5 Rated
- Outdoor Performance
- Marine Design
- Balanced Dome Tweeters
- Rubber Surrounds
- Individually Voiced
- Harman Standard Reliability Testing
- Power Handling: 125Wrms, 375W peak
- Sensitivity (@ 2.83V): 90dB
- Frequency Response: 50Hz – 20kHz
- Nominal Impedance: 4 ohms
What's in the box?:
- 2 x Stage Marine 8" Speakers with attached grilles
- 1 x Stainless steel mounting hardware
- 1 x Drill bit for easy installation
- 1 x Foam gasket
- 2 x Speaker pigtail harness
- 2 x JBL sticker
- 1 x Quick Start Guide
UPC Code 050036383127
JBL Marine MA704 amplifier with 4-channel outputs includes selectable all high or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions with power and performance to meet the needs of any outdoor audio system. Max Power - 1000 Watts Peak
Amplifier:
- 4 Channel Marine Amplifier
- Class D Technology
- Max Power - 1000W Peak
- Power Output, 2Ω - 100W RMS x 4
- Power Output, 4Ω - 70W RMS x 4
- Power Output, 4Ω Bridged - 200W RMS x 2
- Signal-to-Noise Ratio - ≥85dB
- High and low level inputs
- Variable crossovers and bass boost
UPC Code 050036346320
This Milennia REM70 wired remote works with select marine receivers. This remote features a backlit silicone rubber membranes, 2-line display matches radio, adjust bass, treble, fader and balance by using button. 4"W x 2-1/4"H x 3/4"D
General Features:
- Weatherproof
- Backlit silicone rubber membranes
- 2-line display matches radio
- Can adjust bass, treble, fader and balance by using the select button
- Sealed tack switches
- Cord for the harness is 18" so an optional extension cable (REX20-6) is recommended
- Display remote for PRV-250, PRV-350, PRV-175, MBB-2020, MBB-2120, MR-180
UPC Code 648701577010
The REX20-6 extension cable gives you more placement options when you're installing select marine receivers and remotes. It features a 6-conductor plug, and if you have a long run to deal with, you can connect two of these extension harnesses for a total length of 40'.
Extension Cable
- 20-foot extension cable
- 6-conductor plug
- For use with REM-20,21,25,30,50 and 70
UPC Code 648701212003
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
