JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Receiver, Wired Remote Remote, Extension, 4-Channel Amplifier, Install Kit, 4x 6.5" 300 Watt 2-Way Multicolor LED Boat Audio Speakers (Titanium)

---

JBL PRV175 Bluetooth USB Marine Gauge Style Stereo Receiver is made with a IPX5 marine rated faceplate to protect against any weather condition featuring built in Bluetooth for audio streaming, USB input and AUX inputs, AM/FM tuner and RCA or speaker level power outputs.
General Features

• Marine Gauge Style Digital Media Receiver
• AM/FM tuner
• Bluetooth Audio Streaming
• Built-In Amplifier (45 peak x 4 channels)
• Waterproof Faceplate
• USB input and control-for USB drives only
• Auxiliary input
• 2 pair of RCA output
• Wired remote option

UPC Code 648701217503

---

These Infinity KAPPA 6.5" 2-Way 300W Marine Speakers features multi-color LED lighting, Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, SSI (Switch Selectable Impedance) 2 or 4 Ohm option, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. UV resistant marine grade IPX3(IPX5 from front) weather resistant. (Titanium)

General Features:

• 6.5" 2-way speakers (Pair)
• Marine-Grade
• Multi-Color RGB LED Lights
• Plus One Woofer Cone
• Grille-Mounted Mylar Tweeter
• One-Piece Cast Polymer Basket
• IPX5 Rated for Water Resistance
• Power Handling: 100 watts RMS (300 peak)
• Sensitivity: 92 dB at 2.83 volts
• Frequency Response: 40-25,000 Hz
• Impedance: 3 ohms

DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.

Loosen and Tighten BY HAND ONLY.  Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.​

UPC Code 050667373078

---

JBL Marine MA704 amplifier with 4-channel outputs includes selectable all high or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions with power and performance to meet the needs of any outdoor audio system. Max Power - 1000 Watts Peak

Amplifier:

• 4 Channel Marine Amplifier
• Class D Technology
• Max Power - 1000W Peak
• Power Output, 2Ω - 100W RMS x 4
• Power Output, 4Ω - 70W RMS x 4
• Power Output, 4Ω Bridged - 200W RMS x 2
• Signal-to-Noise Ratio - ≥85dB
• High and low level inputs
• Variable crossovers and bass boost

UPC Code 050036346320

---

This Milennia REM70 wired remote works with select marine receivers. This remote features a backlit silicone rubber membranes, 2-line display matches radio, adjust bass, treble, fader and balance by using button. 4"W x 2-1/4"H x 3/4"D

General Features: 

• Weatherproof
• Backlit silicone rubber membranes
• 2-line display matches radio
• Can adjust bass, treble, fader and balance by using the select button
• Sealed tack switches
• Cord for the harness is 18" so an optional extension cable (REX20-6) is recommended
• Display remote for PRV-250, PRV-350, PRV-175, MBB-2020, MBB-2120, MR-180

 

UPC Code 648701577010

---

The REX20-6 extension cable gives you more placement options when you're installing select marine receivers and remotes. It features a 6-conductor plug, and if you have a long run to deal with, you can connect two of these extension harnesses for a total length of 40'.

Extension Cable

• 20-foot extension cable
• 6-conductor plug
• For use with REM-20,21,25,30,50 and 70

UPC Code 648701212003

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267