JBL PRV175 Radio, 2X 6.5" LED Speaker, 2x Black LED Tower Speakers, Remote
JBL PRV175 Bluetooth USB Marine Gauge Style Stereo Receiver is made with a IPX5 marine rated faceplate to protect against any weather condition featuring built in Bluetooth for audio streaming, USB input and AUX inputs, AM/FM tuner and RCA or speaker level power outputs.
General Features
- Marine Gauge Style Digital Media Receiver
- AM/FM tuner
- Bluetooth Audio Streaming
- Built-In Amplifier (45 peak x 4 channels)
- Waterproof Faceplate
- USB input and control-for USB drives only
- Auxiliary input
- 2 pair of RCA output
- Wired remote option
UPC Code 648701217503
This Milennia REM70 wired remote works with select marine receivers. This remote features a backlit silicone rubber membranes, 2-line display matches radio, adjust bass, treble, fader and balance by using button. 4"W x 2-1/4"H x 3/4"D
General Features:
- Weatherproof
- Backlit silicone rubber membranes
- 2-line display matches radio
- Can adjust bass, treble, fader and balance by using the select button
- Sealed tack switches
- Cord for the harness is 18" so an optional extension cable (REX20-6) is recommended
- Display remote for PRV-250, PRV-350, PRV-175, MBB-2020, MBB-2120, MR-180
UPC Code 648701577010
These Infinity's Kappa Marine loudspeakers leverage Infinity’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. These 6-1/2" coaxials feature Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. These speakers are UV resistant in a marine grade IPX3(IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing.
General Features:
- Power Handling: 100 watts RMS, 300 watts peak power
- Sensitivity: 92dB at 2.83 volts
- Frequency Response: 40 - 25kHz
- Voice Coil Diameter: 1 in. (25.5mm)
- Impedance: 3 ohm impedance
- Plus One Woofer Cones
- Perimeter RGB Illumination
- One Piece Polymer Basket
- Mylar Tweeters
- Harman Standard Reliability Testing
- Product Bulk Packaging
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code
The JBL Tower X Marine Speaker system is ready to take your next outdoor adventure to the next level. The fully marinized speakers deliver a JBL pro sound experience complete with RGB lighting to bring it to life. Their rigid Polypropylene long-throw woofer cones deliver great bass to ensure you never miss a beat, coupled with a titanium horn-loaded compression tweeter and fidelity for accurate reproduction. The woofer and tweeter assembly incorporates a patent pending design that helps to project the sound over the stern of the boat, directly to the wave rider's sweet spot, while providing great sound inside the boat.
General Features:
- Marine Rated
- High Output Design
- MultiColor RGB LED Lighting
- 360 Degree Bracket Design
- Individually Voiced
- Harman Standard Reliability Tested
- Power Handling: 100Wrms, 300W peak
- Sensitivity (@ 2.83V): 90dB
- Frequency Response: 50Hz – 20kHz
- Voice Coil Diameter: 1.5in. (38.5mm)
- Impedance: 4 ohms
- Adjustable bar diameter: From 1.75in - 3in. (44.5mm - 76.2mm)
- Product Bulk Packaging
What's In The Box?:
- 2 x Enclosed speaker assembly
- 2 x Two-piece bracket assembly
- 4 x Rubber pad
- Mounting hardware: 2x hex head screws, 2x M6 bolts, 4x M8 x 35mm bolts, 4x M8 x 55mm bolts, 4x
- Flat-washers, 4x Lock-washers, 2x M8 hex-keys, 2x M6 hex-keys
- 2 x RGB lighting cable
- 2 x Security cable
- 2 x Neoprene cover
- 2 x JBL sticker
- 1 x Quick start guide
UPC Code
