ESKIT21601
This marine/motorsports single-DIN digital media receiver comes packed with an array of features sure to boost your vehicle's infotainment system to the next level. This receiver features built-in Bluetooth and USB/AUX inputs to connect to your preferred smart devices, satellite radio readiness, and AM/FM radio. Use the remote control app to gain intuitive control over the receiver's features through your phone! The bright display offers visual customization through a variable color illumination. The conformal coating improves the durability of the circuit boards, making it reliable in open-environment applications!
General Features:
- 255 Segment 1.5 Line Text Display
- Bluetooth Direct Access Button
- Bluetooth Built-In
- Variable Color Illumination
- 13-Band EQ & DTA
- Conformal Coating
- Optional Wired Remote Control Ready
- Front USB & AUX IN
- 3 Preouts 4.0V
- AM/FM Radio Tuner
- Dual Phone Connection
- Sattelite Radio Ready
- Drive EQ
- Short Chassis
- Remote App
- Music Mix
UPC Code 019048234032
Everything you love about the rich, clean, full-range sound from Polk's Dynamic Balance technology is about to hit the waves and backroads thanks to Polk Audio DB522 5.25-Inch 300-Watt 2-Way Speakers. These 2 speakers are marine certified, and with a universal fit, can be used in almost any vehicle - from cars, to motorcycles, to boats and ATVs. These speakers feature 200 watts of max power and 100 watts of RMS power, and with a 4-ohm impedance, 91 dB sensitivity, and 0.75 tweeter, they can handle a full range of sound from rich lows to clear highs. Durable and designed for the outdoors, these speakers will handle as much sound and adventure as you can throw at them.
Speakers:
- 2-way car speakers (pair)
- marine certified — recommended for fresh water and powersports applications
- 5-1/4" polypropylene woofer cone with rubber surround
- 3/4" silk dome tweeter
- handles up to 100 watts RMS (300 watts peak power)
- frequency range: 55-22,000 Hz
- sensitivity: 91 dB
- top-mount depth: 1-3/4"
- grilles included
UPC Code 747192127251
This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original inner fairing of a HD motorcycle, making radio replacement simple. The kit is designed to match the original look and feel of the inner fairing.
Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this kit to make it fit. To keep the audio controls on the handlebars working with the new radio, you'll need a handlebar control interface (sold separately).
General Features:
- Stereo installation kit designed to fit any standard 2" tall aftermarket single DIN radio.
- One-piece design fends off moisture and vibration.
- Designed for an original factory-like fit and finish.
- Includes brackets and hardware parts needed with detailed installation instructions.
Applications
- Single DIN radio
- HD FLH 1998-2013 (Batwing fairing) Roadglide 1998-2013 (Sharknose fairing)
UPC Code 728120484431
The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.
General Features:
- Retains the factory handlebar audio controls
- Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
- Comes with a plug-n-play harness in a water-resistant case
- Provides wires for speakers, constant power, switched power and ground
- Use the BC-9711 to retain rear speakers
- This part number replaces the HD-ASWC-1
Note:
- Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
- Must be without factory amplifier, 2 speaker systems only
UPC Code 086429415762
Metra ST-AK10 10GA Power Sport Motorcycle Universal Amplifier Wiring Kit
General Features:
- Designed tor motorcycles
- 6 toot length of red and black T-Spec OFC power and ground wire
- T-Spec V8MANL fuse holder and 30 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh
- Even for those upgrading the Harmon Kardon system – the ST-AK8 comes with two 47-ohm 1/2 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332274
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
General Features:
- 22" AM/FM Marine Antenna
- Improves Radio reception
UPC Code 799861388630
