Pioneer DEH CD Receiver, 4x 6x9" Coaxial Car Speakers, 4-Ch Amplifier, Wire Kit
This JVC car audio receiver comes packed with all of the media options you need to take your vehicle's infotainment system to the next level. This receiver features CD playback and a classic AM/FM tuner so you can choose between listening to your own tunes and the radiowaves with ease. Bluetooth connectivity lets you conveniently connect your preferred handheld device to the receiver while the USB port allows for high current charging to keep your device powered all through your ride! The VA LCD display presents media information in a bright frontal arrangement for easy viewing.
General Features:
- CD Receiver
- Built-In Bluetooth
- USB/AUX Inputs
- 13-Band EQ
- JVC Remote App Compatibility
- Audio Streaming & Control (A2DP, AVRCP)
- JVC Streaming DJ
- 2 Phones Full-Time Connection
- Bluetooth Hands-Free Profile 1.7
- iPhone Bluetooth Automatic Pairing
- Music Sync. Effect
- Spanish Text Display Compatible
- High Current 1.5A Charging
- K2 Technology for Enhanced Digital Sound Quality
- Time Alignment
- Space Enhancement
- Sound Response
- Sound Lift
- Volume Link EQ
- Remote Control App
- Steering Wheel Remote Control Ready
- VA LCD Display w/ Brightness Control
- Blue Key Color
- AM/FM Tuner
- 18FM, 6AM Presets
- Max Power Output: 50W x 4 / 50W x 2 +Subwoofer (4 ohms) 50W x 1
UPC Code 046838002489
JVC CSDR6931 drvn DR Series 6x9" 3-way car speakers features a lightweight carbon mica material providing clear and undistorted reproduction, Hybrid Surround Rubber Coated Cloth with increased mobility enables high efficiency, Balanced Neodymim Tweeter provides detailed high range and smooth mid range. Works best at 70 Watts (500W Max) of recommended power.
General Features:
- 6x9" 3-Way Speakers
- Power Handling Capacity (Peak power) - 500 Watts
- Power Handling Capacity (RMS power) - 70 Watts
- Impedance - 4 ohms
- Sound Pressure Level: 88dB
- Frequency Response: 58 - 21,000Hz
- Carbon Mica Cone
- Hybrid Surround
UPC Code 046838079788
This JVC marine amplifier is rated waterproof and dustproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output. High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
General Features:
- Max Power Output: 600W
- Rated Power Output @ Stereo (4Ω): 50W x 4 (20Hz–20kHz, ≤1.0% THD)
- Rated Power Output @ Stereo (2Ω): 75W x 4 (1kHz, ≤1.0% THD)
- Rated Power Output @ Bridged (4Ω): 150W x 2 (1kHz, ≤1.0% THD)
- Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
- Speaker Impedance for Bridged connection: 4Ω to 8Ω allowable
- Frequency response (+0, –3dB): 10Hz–35kHz
- Input Sensitivity (RCA): 0.2V-5.0V
- Signal to noise ratio: 89dB
- Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- Operating voltage: 12V DC car battery
- Current consumption: 26A
- Operational temperature range: –10°C – 60°C
- Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
- Weight: 1.6kg (3.5lbs)
- Waterproof Dustproof Vibrationproof: IP66, IP67
UPC Code 046838001925
Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit
General Features:
- 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
- 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
- 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
- 1 x 0.5 mm^2 Remote Wire, 5 m
- 1 x AGU Fuse Holder with 40 A ANL Fuse
- Installation Kit
Installation Instructions:
- Disconnect at first the negative ground connection from the vehicle’s battery.
- Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
- Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
- Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
- Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
- Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
- Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
- At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.
UPC Code 854932002478
