JBL Stadium 600 Amplifier Subwoofer Bundle with 10" 1000W Sub and Wiring Kit
This JBL Stadium mono amplifier delivers the efficiency and power you expect from Class D amplifiers – and the performance you expect from JBL. The comprehensive all new E.A.R.L terminal and power adapter enables easy installation and optimized performance. The remote bass control allows the user to increase and decrease bass output independent of head unit tone controls. The industrial design not only provides an elegant look, but also enhances power dissipation to ensure long term reliability. Stadium amplifiers give you power to shape your car audio experience in new ways.
General Features:
- High-performance, mono Class D subwoofer amplifier
- Low Distortion
- Full On-Board Protection
- Proprietary High-Conductivity Terminals
- Compact footprint
- Sleek design
- Remote Bass Control
- Operating voltage 9-16 volts
- RMS power @ 4 ohms: 380W
- RMS power @ 2 ohms: 600W
- Total peak power: 1500W
- Frequency response: 10Hz – 320Hz @ -3dB
- Crossover filter: LPF 32Hz – 320Hz, Variable 12dB/Oct
- Bass EQ: 70Hz Fix 0-9dB
- THD + N at rated power: ≤0.1%
- High input maximum signal level: 20V
- High input maximum sensitivity: 2V
- Line input maximum signal level: 2V
- Line input maximum sensitivity: 0.2V
- Line-in signal-to-noise ratio (reference to 1 watt): ≥80dB
- Quiescent current draw: ≤1.7A
- Fuse size: 2 x 35A
In the Box
- 1x Amplifier
- 2x Differential Speaker-Level Adapter
- 2x Spare Fuses
- 4x Philip Screws
- 1x Remote Bass Control & Cable
- 1x E.A.R.L Terminal
- 3x Self-Tapping Screws
- 1x Owner’s Manual
UPC Code 050036356121
This Club Series Subwoofer is designed to suit a range of applications. This 10" subwoofer produces signature JBL bass performance with impressive power. It features SSI (Selectable Smart Impedance), an exclusive impedance switch that lets you select the optimum impedance—2 or 4 ohms—for your system. So you get the powerful JBL bass you want, in the configuration you choose.
General Features:
- 10" (250mm) car audio subwoofer
- Power Handling: 250W RMS, 1000W peak
- Sensitivity (@ 2.83V): 92dB
- Frequency Response: 30Hz – 175Hz
- Voice Coil Diameter: 2" (50mm)
- Impedance: 2 or 4 ohms
- SSI (Selectable Smart Impedance)
- High-roll surround
- Proprietary cone design
- Long excursion design
UPC Code 050036345293
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
