XDVD276BT CD/DVD/AUX/Bluetooth Stereo Bundle w/ 2x 6.5" 210W 2x 180W Speakers+Am
Expand your vehicle's media possibilities with the Dual XDVD276BT multimedia receiver. This receiver comes packed with a variety of functions to boost your system to the level. Built-in Bluetooth, DVD playback, front aux and usb inputs, and camera input are just some of the features at your disposable. Use the Dual iPlug smart remote app to gain wireless control over your new receiver system through a smooth and intuitive user interface.
General Features:
- 6.2” Touchscreen LCD (800p x 480p)
- AM/FM Tuner with 30 presets (18FM/12AM)
- Built-in Bluetooth (HFP, A2DP, AVRCP)
- Direct USB control for iPod® and iPhone® devices
- Dual iPlug Smart Remote app via Bluetooth (Apple®/Android™)
- Front USB input (1A charging), AUX Input
- Front panel microSD card input
- Surround sound effects (concert, wide, church, live, passive, none)
- Backup camera input (RCA)
- Rear RCA A/V input
- 3 Pairs of preamp outputs (F/R/S)
- 7 EQ presets
- Steering Wheel Control (SWC) Input
- 200 Watts (50 W x 4)
- Wireless IR steering wheel remote included
- DVD Playback
UPC Code 827204113011
These Club component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors,and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One design deliver hard-hitting bass and long performance life. Starfish Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit included in this component speaker system for easy installation.
General Features:
- Power Handling: 70W RMS, 210W peak
- Sensitivity (@ 2.83V): 92dB
- Frequency Response: 55Hz – 20kHz
- Nominal Impedance: 3.0 ohms
- Plus One Woofer Cone Architecture
- Adjustable Tweeter Output Level
- Acoustically Damped, UV-Resistant Polypropylene Cone
- Bigger Magnet, Bigger Power Handling
- Starfish Tweeter Mounting Adapter
- I-Mount Tweeter Mounting Kit
UPC Code 050036364034
These JBL Club coaxial speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors,and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level.
General Features:
- 6-1/2" (160mm) Two-way Car Speaker,
- Engineered for Better Sound Performance
- Power Handling: 60W RMS, 180W peak
- Sensitivity (@ 2.83V): 93dB
- Frequency Response: 48Hz – 21kHz
- Nominal Impedance: 3.0 ohms
- Plus One Woofer Cone Architecture
- Edge-driven Silk Dome Tweeter
- Adjustable Tweeter Output Level
- Acoustically Damped
- UV-Resistant Polypropylene Cone
- Bigger Magnet, Bigger Power Handling
UPC Code 050036364010
The Club A5055 5-channel amplifier delivers a powerful 50-Watts RMS to each of the front and rear speakers in your car, and a pounding 500-Watts RMS to the subwoofer channel — a much smarter ratio of subwoofer-to-full-range power than what is typical in 5-channel amps. You can also bridge the amp to 3-channel mode to deliver 140-Watts RMS to your front speakers while driving your sub with 500-Watts RMS. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car's factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance.
General Features:
- 5 channel car amplifier
- Compact size
- High and low level input
- Variable crossover and bass boost
- Low noise and distortion
- Input Level Control
- Full on-board protection
- Phase Switch
- RBC wired remote
- Class AB+D amp technology
- Turn-on mode
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
- low-pass filter (32-320 Hz, 12 dB/octave) on subwoofer channel
- bass boost on subwoofer channel (0-12dB at 45Hz)
- phase switch on subwoofer channel (0, 180 degrees)
- preamp and speaker-level inputs
- fuse rating: 30A x 3
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- WxHxD=14-3/16” x 2-1/16" x7-1/8”
UPC Code 050036369206
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105