JBL Celebrity150 Bluetooth Radio, Amp w/Kit, 2x 6x9" 400W + 2x 6.5" 300W Speaker
JBL Celebrity 150 Headunit is Single-Din, Mechless Car Media player with Detachable face, perfect to fit JBL speaker products as a bundled audio system. Multiple playback options like Bluetooth, USB, AUX in, SD Card, and FM Radio allows you choose freely for your favorite listening source.
General specification:
- Power supply: 12 V DC on-board network
- Rated Output Power: 4 x 50W peak
- Fuse rating: 10A
- Frequency response: 20 Hz - 20 kHz
- Bluetooth Operating range: up to 10 m
- Bluetooth Supported profiles: HFP, HSP, A2DP, AVRCP
- FM Radio Frequency coverage: 87.5 - 108MHz
- Installation dimensions (W x H x D): 178 x 50 x 87mm
What’s in the Box
- JBL Celebrity 150 Headunit
- 2x ISO Wiring harness
- 2x Removal tools
- 4x Face-fixing screws
- 1x OM
- 1x Safety Sheet
Features:
- 1 Din Mechless Car Media player with Detachable face
- Multiple Playback Sources: Bluetooth, USB, AUX in, SD Card, FM Radio
- Wireless Bluetooth Streaming
- 30 Preset stations (18 FM / 12 AM)
- RCA Line Output (2 pairs; 4-volt)
- 4x50 Watts Maximum Power Output
- ISO Connector (wiring harness included)
UPC Code 050036396912
These JVC CS-DF620 6.5" coaxial speakers will pump out clear and impressive sound and match all of the audio needs of your vehicle infotainment system. These drvn DF series speakers combines powerful sound reproduction with a tough looking design. These speakers feature hybrid surrounds with increased mobility, which enables high efficiency and improved follow-up to audio signals. The speakers flaunt 25 watts of RMS power and 300 Watts of peak power handling, ensuring a powerful sonic output.
General Features:
- 6.5" 2-Way Coaxial Speakers
- RMS Power Handling: 25W
- Peak Power Handling: 300W
- 4 Ohm Impedance
- Diaphragm: PP Injection Cone
- Surround: Hybrid Surround (Rubber & Cloth)
- Magnet: Ferrite
- 1" Balanced Dome Tweeter
- Frequency Response: 70 - 19,000Hz
- Sound Pressure Level: 86dB
UPC Code 046838081583
These JVC CS-DF6920 6x9" coaxial speakers will pump out clear and impressive sound and match all of the audio needs of your vehicle infotainment system. These drvn DF series speakers combines powerful sound reproduction with a tough looking design. These speakers feature hybrid surrounds with increased mobility, which enables high efficiency and improved follow-up to audio signals. The speakers flaunt 30 watts of RMS power and 400 Watts of peak power handling, ensuring a powerful sonic output.
General Features:
- 6x9" 2-Way Coaxial Speakers
- RMS Power Handling: 30W
- Peak Power Handling: 400W
- 4 Ohm Impedance
- Diaphragm: PP Injection Cone
- Surround: Hybrid Surround (Rubber & Cloth)
- Magnet: Ferrite
- 1" Balanced Dome Tweeter
- Frequency Response: 30 - 17,000Hz
- Sound Pressure Level: 82dB
UPC Code 046838081590
This JVC marine amplifier is rated waterproof and dustproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output. High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
General Features:
- Max Power Output: 600W
- Rated Power Output @ Stereo (4Ω): 50W x 4 (20Hz–20kHz, ≤1.0% THD)
- Rated Power Output @ Stereo (2Ω): 75W x 4 (1kHz, ≤1.0% THD)
- Rated Power Output @ Bridged (4Ω): 150W x 2 (1kHz, ≤1.0% THD)
- Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
- Speaker Impedance for Bridged connection: 4Ω to 8Ω allowable
- Frequency response (+0, –3dB): 10Hz–35kHz
- Input Sensitivity (RCA): 0.2V-5.0V
- Signal to noise ratio: 89dB
- Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- Operating voltage: 12V DC car battery
- Current consumption: 26A
- Operational temperature range: –10°C – 60°C
- Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
- Weight: 1.6kg (3.5lbs)
- Waterproof Dustproof Vibrationproof: IP66, IP67
UPC Code 046838001925
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running. The car amp install kit works with a wide range of sound systems and car types and it makes the installation process easy.
General Features:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
