JBL Single DIN Bluetooth FM Receiver, 6.5" 300W Speakers (Pair), 12" Subwoofer
JBL Celebrity 150 Headunit is Single-Din, Mechless Car Media player with Detachable face, perfect to fit JBL speaker products as a bundled audio system. Multiple playback options like Bluetooth, USB, AUX in, SD Card, and FM Radio allows you choose freely for your favorite listening source.
General specification:
- Power supply: 12 V DC on-board network
- Rated Output Power: 4 x 50W peak
- Fuse rating: 10A
- Frequency response: 20 Hz - 20 kHz
- Bluetooth Operating range: up to 10 m
- Bluetooth Supported profiles: HFP, HSP, A2DP, AVRCP
- FM Radio Frequency coverage: 87.5 - 108MHz
- Installation dimensions (W x H x D): 178 x 50 x 87mm
What’s in the Box
- JBL Celebrity 150 Headunit
- 2x ISO Wiring harness
- 2x Removal tools
- 4x Face-fixing screws
- 1x OM
- 1x Safety Sheet
Features:
- 1 Din Mechless Car Media player with Detachable face
- Multiple Playback Sources: Bluetooth, USB, AUX in, SD Card, FM Radio
- Wireless Bluetooth Streaming
- 30 Preset stations (18 FM / 12 AM)
- RCA Line Output (2 pairs; 4-volt)
- 4x50 Watts Maximum Power Output
- ISO Connector (wiring harness included)
UPC Code 050036396912
JBL Shock Wave 6.5" midrange speakers features exceptionally high sensitivity and super powerful magnetic system to deliver louder and better sound quality. Pressed pulp cone with reinforced double fabric suspension to ensure steady, balanced sound and long performance life. Designed with EVA vibration protection gasket with easy and reliable connector.
General Features:
- Speaker Size: 6-1/2"
- Design: Mid-range
- Woofer Composition: Paper
- Woofer Surround: Cloth
- Peak Power Handling: 300 watts
- RMS Power Handling: 150 watts
- Total Peak Per Pair/Set: 600 watts
- Total RMS Per Pair/Set: 300 watts
- Sensitivity: 96 dB
- Frequency Response: 80 - 20,000 Hz
- Impedance (Per Voice Coil): 4 ohms
- Shallow Mount Installation: No
- Magnet Type: Ferrite
UPC Code 050036389006
JBL designed their Club Series 122SL 12” subwoofer for versatility. Its low-profile design allows it to fit into shallow enclosures, and its selectable impedance gives you flexibility in configuring your system. That means it'll fit in just about any vehicle and into any upgrades you make to your bass setup. Unlike most other dual voice coil subs, this sub's Selectable Smart Impedance (SSI™) switch makes it easy to change the sub's impedance from 2 ohms to 4 ohms, the most commonly used impedances. The sub's proprietary aluminum cone punches out bass as low as 30Hz and handles up to 400 watts RMS. It works equally well in free-air applications, or in sealed, bandpass, or ported enclosures, another example of its versatility.
Genral Features
- Subwoofer: 12" (300mm) Aluminum Driver
- Power Handling: 400W RMS, 1200W peak
- Sensitivity: (1W/1m)85dB
- Frequency Response: (-6dB)30Hz – 500Hz
- Nominal Impedance: 2 or 4 ohms, switch-selectable
- Voice Coil Diameter: 2" (50mm)
- Cutout Diameter: 11" (279.04mm)
- Mounting Depth: 3-1/4" (82.5mm)
What's in The Box?
- 1x 12" Subwoofer
- 1x EVA Foam Gasket
- 1x Owner’s Manual
UPC Code 050036399487
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
